ANALYSIS OF OCCUPATIONAL SAFETY AND HEALTH (K3) IMPLEMENTATION USING HIRADC METHOD IN THE BASIC MACHINERY SECTOR
DOI:
https://doi.org/10.35261/barometer.v11i1.13173Abstract
One aspect that cannot be ignored in the manufacturing production process is the implementation of Occupational Health and Safety (OHS). OHS is an effort to suppress or reduce the risk of accidents and occupational diseases. The basic machining sector is one of the areas that has risks in the workshop of the Manufacturing Engineering Department in Politeknik Manufaktur Bandung. This study aims to determine the extent of the implementation of OHS using the HIRADC (Hazard Identification, Risk Assessment, and Determining Control) method in this sector. The study was conducted with a qualitative descriptive approach, and data collection was carried out through direct observation, interviews, and questionnaires. The sample of this study was 68 second-year students who were carrying out machining process practices. The results of this study indicate that in the bench work sector, there are 9 potential hazards, the lathe sector has 17, the milling sector has 13, and the drilling sector has 11. The results of the implementation of OHS in the basic machining sector have an average of 91.45%. Recommendations to maintain and improve the implementation of OHS include creating OHS SOPs, adding signs, and improving OHS administration.
Downloads
References
[1] Anita Dewi P.S., Dasar-Dasar Keselamatan dan Kesehatan Kerja. Jember: UPT Penerbitan UNEJ, 2012.
[2] Febriana Sulistya Pratiwi. (2024, Januari 3). RI Alami 265.334 Kasus Kecelakaan Kerja hingga November 2022. [Online].https://dataindonesia.id/tenaga-kerja/detail/ri-alami-265334-kasus-kecelakaan-kerja-hingga- november- 2022
[3] OHSAS 18001, Occupational Heatlh and Safety Management System Requirements, 2007.
[4] A. Meilin, Manajemen Keselamatan Dan Kesehatan Kerja. Indonesia: Strada Press, 2021.
[5] Febrilia Mustika, “Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko dengan Metode HIRADC di Pabrik Pengecoran Logam Politeknik Manufaktur Bandung,” (Thesis). Institut Teknologi Bandung, Bandung, 2017.
[6] Mohammad Ikrar P., H. Suprapto, R.R. Yanti, “Pencegahan Kecelakaan Kerja Dengan Metode Hiradc Di Perusahaan Fabrikasi Dan Machining.” Jenius: Jurnal Terapan Teknik Industri, vol. 1, no. 2, pp. 98–108, doi: 10.37373/jenius.v1i2.60., 2020.
[7] M. R. Jannah, S. E. Unas, M. H. Hasyim, “Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Melalui Pendekatan Hiradc Dan Metode Job Safety Analysis Pada Studi Kasus Proyek Pembangunan Menara X di Jakarta”. Jurnal Mahasiswa Jurusan Teknik Sipil, vol.1, no.2. pp.1138-1145, 2017.
[8] G. M. Sani, E.D. Priyana, A.W. Rizqi, “Identifikasi dan Analisis Risiko Kecelakaan Kerja dengan Metode JSA (Job Safety Analysis) di Bengkel Pemesinan SMK Nurul Islam Gresik,” Jurnal Sains, Teknologi dan Industri, vol. 20, no. 1, pp. 300–307, 2022.
